SKY7000
Integrated Payment System
-
SKY7000 is multi-payment support board that integrates Smart Card Reader (SKY5000/5100) IC and Magnetic Stripe Reader (SKY3700B) with Renesas' CPU(RZ/G2UL). This RZ/G2UL microprocessor includes a Cortex®-A55 (1.0GHz) CPU, a 16-bit DDR4 interface, and a simple LCD controller. It also has many interfaces such as camera input, display output, USB 2.0, and Gb-Ethernet.
SKY7000 consists of a module board and a carrier board. The module board includes CPU and payment ICs.
The carrier board is equipped with MIPI camera, LCD, audio, Ethernet, MSR, SCR, UART, SPI and GPIO interfaces.SKY7000 provide 2 channels ISO-7816 smart card interface, 3 tracks of magnetic card data and QR barcode recognition that comply with ISO and EMV standards. Each recognized data is decoded into information necessary for payment through an internal algorithm of the board, and the result can be output to an LCD screen to be checked.
Maximum 12.5V input power is sourced via a USB-C connector and managed via a single-chip Renesas DA9062 system PMIC.
Onboard memory includes 1GB DDR4 SDRAM, 64GB eMMC and 16MB QSPI flash memory, plus microSD slot for removable data.
Hardware supports mechanical and electrical protocols for the EMV Level 1 certification.
Features
Main & QR solution CPU : RZ/G2UL
ARM Cortex®-A55 (1.0GHz) & ARM Cortex®-M33 (200MHz)
Smart card reader solution Chip : SKY5000/5100
Magnetic stripe reader Chip : SKY3700B
MIPI-CSI, G. Ethernet, USBs, UARTs, I2Cs, SPIs, Keypad, GPIOs
Support to EMV® Level 1 certification
Target Markets and Applications
Point Of Sales (POS)
Kiosk
Barcode Payment Terminal
Credit Authorization Terminal (CAT)
Automated Teller Machine (ATM)
Distribution center
Benefits
Includes 4.3-inch LCD display for data verification
High speed 1D & 2D Barcode recognition
2 Channel EMV4.3 & ISO-7816 Smart Card Interface
Simultaneously decode 3 tracks of Magnetic card data
Support Samsung Pay
Support all EMV® standard QR payment methods including Alipay
Optimizing development environment with Linux kernel and C language-based software
Reduce development costs and accelerate time to market with efficient solution
Experienced engineering service team to assist in EMV® Level 1 certification
Diagrams
Product Images
SKY3700B
Magnetic Stripe Reader
-
SKY3700B provides decoding functions for magnetic stripe storage system, with all the analog and digital circuits in a single chip.
-
Features
Simultaneously decode 3 tracks of card data
Bidirectional card reading
Wide range of swipe speed: 5~150 cm/s
Automatic Gain Control for wide magnetic signal ranges
Signal conditioning adapted to head signal
Superior data recognition algorithm after signal conditioning circuit
Support TDES & 128bit AES encryption
DUKPT key management (ANSI X 9.24)
ISO/IEC 7811 and JIS2 format support
UART or SPI serial data interface
Very few external components can be built inside Magnetic Head
High immunity to ambient noise and electronic discharge
Diagrams
Magnetic stripe card analyze
Digital signal processing for jitter, varying bit interval, amplitude fluctuation, and Twin Peaks
-
Noisy head signal
-
Partial Low Amplitude
-
Q card -Jitter & Amp variation Jitter(24%:24%), Amplitude(30%)
-
Twin peak
-
Removed signal by Magnet
SKY5000
Smart Card Reader
-
SKY5000 are IC Card reader MCU Chip which is fully compliant with ISO-7816 / EMV standards. It has 32bit RISC CPU (Cortus APS23) with USB interface.
-
Features
CPU
Pipelined RISC 32bit high performance MCU, frequency up to 48MHz
Memory
64Kbytes on-chip program memory(EEPROM)
Code protection (prohibit debug data read)
8Kbytes boot ROM (Mask ROM)
20Kbytes on-chip SRAM for data memory
Debug
JTAG debug interface
Smart Card Interface
2 Channel ISO-7816 Card Interface
Support Class A/B/C supplies with external 5V system power input
Fully compliance with EMV4.1 & ISO-7816 standards
Serial peripherals
1 USB 2.0 FS includes PHY
2 Channel UART
1 Channel I2C master/slave
2 Channel SPI
Application
